New textures have been added to the Material library:

  discolored_white_tex, for the time being experimental...
  vibrant_coral_tex
  vibrant_yellow_tex
  
New pieces added in Library 600:

  bar2_4x5_4_round
  bar_2l_with_ball_joint
  bar_2l_with_thick_stop_and_pin_holes    (Thank you, Ralph!)
  bar_2l_bar_6l_with_thick_stop
  bar_8l_with_stop_rings_and_pin
  beehive
  bracket1x1x1_down    (Thank you, Ralph!)
  bracket1x1x1_up    (Thank you, Ralph!)
  bracket1x1_2x1_down
  bracket1x1_2x1_up
  bracket2x2_1x2_up_centered
  brick1x1x0_667_with_curved_top
  brick1x1x2_with_square_hole_in_1_side
  brick1x1_with_studs_on_2_adjacent_sides
  brick1x1x3
  brick1x2x0_667_with_curved_top    (Thank you, Ralph!)
  brick1x4x0_667_with_curved_top    (Thank you, Ralph!)
  brick1x4x3
  brick2x1_with_curved_top
  brick2x2_round_with_pin_holes
  brick2x2_with_pin_and_axlehole
  brick2x4_with_2x2x2_3_cutout_and_2_wheel_pins
  brick4x4_round_with_3x3_recess_with_hole_and_snapstud
  brick5x5_corner_round
  car_base6x12x2_3_with_side_flanges    (Thank you, Arjan!)
  car_engine2x2_with_air_scoop
  car_mudguard4x3x1
  container_box2x2x2_with_solid_studs
  cylinder1x1_333_with_0_5_bar_and_bar_hole    (Thank you, Ralph!)
  cylinder_half1x2_with_cutout
  dish6x6_inverted_no_studs_with_handle
  gate1x4x9_arched_with_bars
  hinge_panel3x4x3_curved
  minifig_boomerang
  minifig_handlebars_with_angular_handles
  minifig_helmet_classic_with_thick_chin_guard    (Thank you, Ralph!)
  minifig_lantarn    (Thank you, Ralph!)
  minifig_microphone    beware, this has three color parameters!
  minifig_radio_with_short_handle
  minifig_ski_4l_without_hinge
  minifig_syringe
  minifig_torch_without_grooves
  panel1x4x3_with_side_flanges
  panel1x6x3_with_studs_on_sides
  panel1x6x5_corrugated
  plate1x1x0_667_half_round_with_open_side_stud
  plate1x1x0_667    (Thank you, Tom!)
  plate1x1_round_with_angled_bar    (Thank you, Ralph!)
  plate1x1_round_with_bar_handle_on_short_stem    (Thank you Ralph!)
  plate1x1_round_with_bar    (Thank you, Ralph!)
  plate1x1_with_handles_on_opposite_ends    (Thank you, Ralph!)
  plate1x2_half_round_with_1_centre_stud    (Thank you, Ralph!)
  plate1x2_with_ball_joint_on_end
  plate1x3_round_ends_and_3_open_studs    (Thank you, Ralph!)
  plate1x4_round_ends_with_2_open_studs_on_ends    (Thank you, Ralph!)
  plate1x4_with_plate1x4_at_45_degrees
  plate1x5
  plate2x2_round_with_4_verticle_bars
  plate2x2_with_2_pins
  plate3x3
  plate4x4_without_corner
  plate4x6_trap_door_with_bars
  plate4x6_without_corners
  plate4x8_round_semicircle
  plate6x8_trap_door_frame_with_flat_clips
  plate10x10_octogonal_open_center    (Thank you, Ralph!)
  slope_brick6x2_double_inverted_with_open_center
  slope_brick10_6x1
  slope_brick13_4x1    (Thank you, Ralph!)
  slope_brick_curved1x3_with_1x2_inverted_cutout    (Thank you, New Elementary!)
  slope_brick_curved2x1_with_cutout_left
  slope_brick_curved2x1_with_cutout_right
  slope_brick_curved2x2_inverted
  slope_brick_curved2x8x2_double    (Thank you, Ralph!)
  slope_brick_curved2x8x2_inverted_double    (Thank you, Ralph!)
  technic_axle_with_perpendicular_pin_hole
  technic_gearbox_4x4x1_6667
  technic_gear_8_tooth_reinforced
  technic_pin_towball
  technic_plate1x6_with_holes
  technic_plate1x10_with_holes
  technic_rotor_2_with_4_studs
  technic_rotor_3_blade
  technic_steering_arm_with_3_ball_joints_with_1l_arm_side_connection    (Thank you, Ralph!)
  tile1x1_heart_shape    (Thank you, Ralph!)
  tile1x2_half_round    (Thank you, Ralph!)
  tile1x2_with_rounded_ends    (Thank you, Ralph!)
  tile2x2_round_mixel_eyed
  tile2x2_triangular    (Thank you, Ralph!)
  tile2x6
  tile3x3_round
  tile4x4_corner_round
  train_track_6_studs_wide_straight
  tyre_24x12_balloon
  wedge4x4_triple_with_stud_notches
  wheel_rim_10x14_with_fake_bolts_and_6_spokes
  wing2x4_left_with_truncated_tip    (Thank you, Ralph!)
  wing2x4_right_with_truncated_tip    (Thank you, Ralph!)
  wing2x6_left
  wing2x6_right
  wing4x6_with_2x2_cutout
  wing4x6_left    (Thank you, Ralph!)
  wing4x6_right    (Thank you, Ralph!)
    
New pieces added in Library 543:

  bow_window1x4x2
  brick1x1x1_2_3    (Thank you, Ralph!)
  dh_arch1_6_mod
  dual_f_slope6x4    (Thank you, Arjan!)
  fence1x4x2_paled    (Thank you, Ralph!)
  ffopentwo_block2_2
  half_cylinder_2x4x2
  half_cylinder_2x4x5
  minifigure_baby
  minifigure_skater_helmet
  panel1x2x1_mod
  plate1x2_with_exhaust_ports
  rim_wide_18x7_with_technic_hole
  sprocket_25    (Thank you, WallE!)
  technic_cross_block1x3x2
  technic_plug7
  tyre_37x22
  tyre_low_narrow_24x7

Pieces changed in Library 543:

  f_leftwinglet2_2
  f_rightwinglet2_2
  stwa_r2d2_body
  technic_plug6

New pieces added in Library 542:

  arch1x3x2
  antenna_1_flat_top
  asian_fence1x4x2
  barrel_mod
  bat_a_rang
  bat_rudder
  bracket1x3x2
  bracket1x5x2
  bracket_block1_2_down    (Thank you, Arjan!)
  bracket_block1_2_2_down
  bracket_block1_2_2up
  bracket_block1_2_up    (Thank you, Arjan!)
  brick1x2x1_2_3
  brick1x2_with_handle
  brick2x2_round_grilled
  brick2x2_round_sloped
  brick2x2_with_ball_cup    (Thank you, WallE!)
  bricks_brick1x2
  bricks_brick1x4    (Thank you, Arjan!)
  bucket
  bucket_handle
  chain_link    (Thank you, Arjan!)
  chain_link_end    (Thank you, Arjan!)
  clawh_block1_1_new
  clawthblock1_1_new
  clip_holder
  corner_slope2_2
  crate2_2    (Thank you, Arjan!)
  curved_f_slope2_2_short
  curved_hrblock1_10
  curved_invslope1_2
  curved_slope2_3
  curved_slope4x2
  curved_slope4x3_open
  dhi_arch1_3
  diamond
  dish24
  door_frame1x4x6
  door_frame2x4x6
  door_glass1x4x6
  door_with_handle1x4x6
  door_with_panes1x4x6
  dswheelbase2_4
  dual_f_claw2_1_new
  d_curved_slope1_2    (Thank you, Arjan!)
  ffblock6_6
  ffrblock1_1_mixel_eyed
  ffrblock1_1_with_nipple
  ffrblock2_2_open    (Thank you, Arjan!)
  fftriangle2_2
  fh_connect2_2_new
  flex_hose_3l
  flex_hose_4l
  flex_hose_5l
  flex_hose_6l
  flex_hose_7l
  flex_hose_8l
  flex_hose_9l
  flex_hose_10l
  flex_hose_11l
  flex_hose_12l
  flex_hose_13l
  flex_hose_14l
  flex_hose_15l
  flex_hose_16l
  flex_hose_17l
  flex_hose_19l
  flex_hose_20l
  flex_hose_23l
  flex_hose_26l
  flex_hose_30l
  flex_hose_45l
  flex_hose_segment
  flex_joint_24_female
  flex_joint_24_male
  flick_missile
  flower2x2
  frblock1_1_open
  frblock2x2_single
  frclaw1_1_new
  frclaw1_2_new
  frclaw2_1_new
  frclaw2_1_one
  frclaw2_1_one_new
  friction_cylinder
  friction_ram
  fsblock1_3
  fvclaw1_1_new
  f_block1_12
  f_block2_2_raised    (Thank you, Arjan!)
  f_block8_16
  f_claw1_1_new
  f_leftwinglet2_2
  f_rightwinglet2_2
  f_swivelbottom4_2_new
  f_swiveltop4_2_new
  f_turn_base_l
  f_turn_disc_l
  f_winglet2_2
  f_winglet3_4_mod
  gold_ingot
  guiding_f_block2_8
  guiding_h_block2_2
  half_dome
  half_round_tile1x1
  hatch_frame1_4_mod
  hhside1_2_mod
  hhside1_4_mod
  hinge_plate3x12
  hoblock1_1
  hrclaw1_1
  hrcone1_1_mod
  hricone1_1
  hrwindow_mini_door_1_2    (Thank you, Ralph!)
  hsblock1_2_double_corner
  hsblock1_2_new
  hsblock1_3
  h_arch1_6_new
  h_hrblock2_2_mod
  h_opentwo_block2_2
  h_panel1_6
  h_side1_2_mod
  h_slope3x3    (Thank you, Arjan & Ralph!)
  h_turn_disc_l
  h_window1x2x3mod
  h_window1_2_mod
  ice_cream
  idslope4_6_new
  inv_dome2x2
  life_buoy
  light_stick
  minifigure_barbell_weight
  minifigure_batman_utility_belt
  minifigure_beanie_cap
  minifigure_body_armour
  minifigure_bubble_helmet_half    (Thank you, Ralph!)
  minifigure_double_barrel_space_gun
  minifigure_dynamite_sticks
  minifigure_feathers_with_pin
  minifigure_fez
  minifigure_hand
  minifigure_handcuffs
  minifigure_helmet
  minifigure_helmet_no_chin
  minifigure_high_hat
  minifigure_left_arm
  minifigure_night_vision_goggles
  minifigure_police_hat
  minifigure_right_arm
  minifigure_robot_head
  minifigure_roller_skate
  minifigure_skate
  minifigure_ski_pole    (Thank you, Ralph!)
  minifigure_stud_shooter_trigger
  minifigure_torso
  minifigure_torso_paint
  minifigure_toy_winder_key
  mini_closet_drawer
  mixel_plate_1x2    (Thank you, Ralph!)
  mixel_plate_1x2_with_ball    (Thank you, Ralph!)
  mixel_plate_2x1    (Thank you, Ralph!)
  mixel_plate_2x1_with_ball    (Thank you, Ralph!)
  open_frblock4_4    (Thank you, Steven!)
  nexogon
  panel1x4x5_with_window
  pavilion3x6x5     (Thank you, Ralph!)
  plate1x1_half_round_with_handle
  plate1x1_with_tooth_inline
  plate1x2_round_endings
  plate1x2_with_shaft_12l
  plate1x2_with_stud_shooter
  plate1x2_with_technic_hole
  plate1x2_with_technic_hole_down
  plate2x1_with_3_teeth_inline
  plate2x2_mod    (Thank you, Arjan!)
  plate2x14
  plate3x6_half_round
  plate4x4_open
  plate6x6_round_with_snap
  pyramid_tile1x1
  quarter_dome_round3x3x2
  quarter_tile1x1
  radiator_sloped    (Thank you, Ralph!)
  rigid_inflatable_boat_small
  rim_wide_18x14_with_axle_hole
  rim_wide_18x14_with_technic_hole
  robo_police_swat_gun
  roll_cage4x4x1
  roll_cage5x4x3_2_3
  shell_with_worm_3x6x10    (Thank you, Ralph!)
  skeleton_arm_3
  skeleton_arm_4
  skeleton_leg_dementor_stand    (Thank you, Ralph!)
  skeleton_twisted_arm
  sliding_ladder16
  sliding_ladder16_with_railing
  slope1x2_stepped
  slope1_4
  slope6_3_mod
  spoiler2x4_with_handle
  spring_shooter1x4
  stick
  stwa_f_swivel3
  stwa_h_swivel5
  stwa_lightsaber_twist
  stwa_xwing_canopy
  tail_pipe_with_plug
  technic_axle_5_ended
  technic_beam_2_with_angled_bar
  technic_beam_3x3_t_shaped
  technic_brick2x2_with_horizontal_snap
  technic_brick2x2_with_rotation_socket
  technic_brick2x2_with_vertical_snap
  technic_brick4x2_open
  technic_brick4x4_open
  technic_brick4x6_open
  technic_brick6x6x2_open
  technic_brick8x6_open
  technic_bush_half
  technic_bush_with_pneumatic_t_piece
  technic_cross_block2x2
  technic_cross_block2x2x2
  technic_damper_2
  technic_double_snap_with_hole
  technic_extension_pipe
  technic_flat_liftarm_3x5_corner_curve
  technic_liftarm_1
  technic_liftarm_2_with_joint_ball
  technic_liftarm_3x7_bent
  technic_middle_ring
  technic_plug_with_snap
  technic_plug2_with_pin_hole
  technic_plug3_with_pin_hole
  technic_rack1x20    (Thank you, Sren!)
  technic_rotor_2_blades
  technic_tri_axle
  tech_axle_3_ended
  tech_axle_4_ended
  tech_axle_9
  tech_ball
  tech_pipe_mod
  tech_pipe_elbow_new
  tech_plug6
  telescope    (Thank you, Steven!)
  tile2x2_inverted    (Thank you, Steven!)
  tile2x2_quarter_round
  tile2x2_with_angled_end
  tile2x3
  tile3x2_with_angled_end
  train_buffers2_new
  train_buffers_new
  train_cowcatcher    (Thank you, Ralph!)
  train_wheel_large    (Thank you, Ralph!)
  train_wheel_large_without_flange    (Thank you, Ralph!)
  tub     (Thank you, Ralph!)
  tyre_30x14
  tyre_56x26
  tyre_43_2x22
  very_very_very_old_tyre    (Thank you, Ralph!)
  vfh_doorright1_3
  vh_arch1_3    (Thank you, Arjan!)
  wheelbase1_2
  wheel_mudguard_2
  wheel_mudguard_3
  window1x2x3_latticed_pane
  window1x2x3_pane_with_thick_corner_tabs
  window1x4x3_pane_opening
  window_glass1x2x3mod
  window_glass1_2_mod
  window_shield6x6x2
  window_shield18
  window_shield19
  window_shield20
  window_shutter1x2x3
  windscreen6x6x3_dome_hinge_lock
  wi_block1_4

Pieces changed in Library 542:

  bar
  binoculars
  container_door_left
  container_door_right
  curved_f_slope4_4
  curved_f_slope4_6
  curved_window_shield
  dhrblock1_3
  dhrblock1_6
  dish2_2
  dish3_3
  dish4_4
  dish6_6
  dish6_6_open
  frclaw4_4
  friction_ram
  fsblock1_2
  f_sideleft3_2
  f_sideleft4_2
  f_sideright3_2
  f_sideright4_2
  hatch1_4_s
  head    (added a third type)
  head_bp01
  helmet_explorien
  hook_fblock1_2
  hrblock1_2
  hrblock1_3
  hrblock2_3
  hrblock4_1
  hrblock4_2
  hrblock4_4_open
  hsblock1_4
  h_post1_2
  magneet_holder
  mini_closet
  mini_flag
  mini_flag_sliced
  pulley
  seat2_2
  slant1_1
  slant1_2
  sliding_ladder
  slope1_2_grill
  socket_swivel
  space_cover
  space_mmu
  stwa_battledroid_arm
  stwa_canopy
  stwa_connector_2
  stwa_dh_swivel1_2
  stwa_dh_swivel1_4
  stwa_dh_swivel1_6
  stwa_dualpivotconnect
  stwa_f_cover4_4
  stwa_f_swivel1
  stwa_f_swivel3
  stwa_h_swivel1
  stwa_hatch2
  stwa_podbrake
  support1_2
  tail_pipe
  tail_s
  tech_gear_20_tooth
  tech_pipe
  tech_plug_locker
  train_cabine_new
  train_cabine_new_glass
  train_pantograph2
  vizor_3
  wheel_inside4
  wheel_inside8
  window_shield2
  window_shield3
  window_shield12
  window_shield16

New textures have been added to the Material library:

  aqua_tex
  bright_bluish_green_tex
  bright_purple_tex
  bright_reddish_violet_tex
  cool_yellow_tex
  dark_azure_tex
  dark_brown_tex
  flame_yellowish_orange_tex
  lavender_tex
  light_bluish_green_tex
  light_nougat_tex
  light_purple_tex
  light_red_tex
  light_reddish_violet_tex
  light_royal_blue_tex
  light_stone_grey_tex
  light_yellow_tex
  medium_azure_tex
  medium_lavender_tex
  medium_lilac_tex
  medium_nougat_tex
  nougat_tex
  olive_green_tex
  rubber_black_with_bumps_tex
  sand_red_tex
  sand_violet_tex
  spring_yellowish_green_tex
  t_orange_tex
  titanium_metallic_tex
  transparent_bright_bluish_violet_tex
  transparent_bright_green_tex
  transparent_fluorescent_blue_tex
  warm_gold_tex

Textures have been renamed:

  brick_yellow_tex (was "beige_tex")
  bright_green_tex (was "green2_tex")
  bright_orange_tex (was "orange_bright_tex")
  bright_violet_tex (was "purple_tex")
  bright_yellowish_green_tex (was "yellowgreen_tex")
  bright_yellowish_orange_tex (was "orange_tex")
  dark_grey_tex (was "grey2_tex")
  dark_orange_tex (was "red_brown_tex")
  dark_stone_grey (was "dark_grey2_tex")
  earth_blue_tex (was "dark_blue_tex")
  earth_green_tex (was "bnsf_green_tex")
  earth_orange_tex (was "brown_tex")
  medium_stone_grey (was "lt_grey_tex")
  pastel_blue_tex (was "maersk_blue_tex")
  real_gold_tex (was "gold_tex")
  sand_blue_tex (was "dark_cyan_tex")
  sand_green_tex (was "lt_green_tex")
  silver_metallic_tex (was "silverish_tex")
  transparent_brown_tex (was "t_black_tex")
  transparent_fluorescent_green_tex (was "t_yellowgreen_tex")
  transparent_fluorescent_reddish_orange_tex (was "t_orange_tex")
  transparent_light_blue_tex (was "t_cyan_tex")
  
===============================================================================

New pieces added in Library 541:

  crane_arm_middle_section
  fsblock2_2
  fvclaw1_1_mod
  fvclaw1_2
  stwa_lightsaber_beam_short
  tyre_balloon2
  wheel_inside11
  w_block2_6
  
Pieces changed in Library 541:

  diver_speargun
  vhside3_2

A new texture has been added to the Material library:

  sand_yellow_tex

===============================================================================

New pieces added in Library 540:

  clawthblock1_1
  curved_hrblock2_4
  curved_invslope1_4
  curved_slope1_2
  curved_slope1_4
  dual_ffclaw2_3
  ffblock1_3
  ffblock2_4
  ffrblock1_1
  frclaw1_2
  frclaw4_4
  f_block1_4mod
  f_claw2_1_new
  hlblock1_1_new
  open_f_block4_4
  slant1_2
  slope1_2_mod
  window_shield17

Changes have been made to the material.lib, in order to support POV-Ray 3.7,
a new version of Persistence of Vision, which supports multiple CPU's inside
a single computer, increasing render speeds!

In order to change your files to make them 3.7 compatible, you need to take
the following steps:

1. Add a #version 3.7; statement to your .pov-file, preferably somewhere at
   the top of that file.
2. Remove all "interpolate 4" statements from your material_map textures.
3. Modify your .ini-file
4. Take a look at the downloadable sample files that you can find at our
   website :-)

A new texture has been added to the Material library:

  maersk_blue_tex

Pieces renamed in Library 540:

  slant1_1 (was "slope1_1")

===============================================================================

New pieces added in Library 539:

  curved_window_shield
  f_block3_4
  short_legs
  tech_axle_joiner4
  tech_steering_wheel

New textures have been added to the Material library:

  dark_beige_tex
  dark_orange_tex

===============================================================================

New pieces added in Library 538:

  curved_hrblock1_4
  dh_slope1_2
  dh_triarch1_6
  tech_flat_liftarm4
  tech_liftarm_11

Pieces changed in Library 538:

  cam
  h_fence1_4
  tech_flat_liftarm5
  tech_flat_liftarm6
  tech_flat_liftarm7

Pieces renamed in Library 538:

  tech_flat_liftarm4_mod (was "tech_flat_liftarm4")

===============================================================================

New pieces added in Library 537:

  clawh_block1_1
  frdisc8
  jet_engine_cover_mod
  slope1_2_grill
  stwa_blaster

===============================================================================

New pieces added in Library 536:

  claw
  hhwheelbase2_2
  tech_cornerblock5_5
  tech_gear_40_tooth
  tech_liftarm_5_corner

===============================================================================

New pieces added in Library 535:

  dhatch_innerhatch    (Thank you, Jeroen!)
  f_leftwinglet3_6
  f_rightwinglet3_6
  h_frame2_4    (Thank you, Jeroen!)
  openf_winglet4_4
  tyre_large_5
  wheel_inside10
  
Pieces changed in Library 535:

  tail_engine
  window_glass1_2

New textures have been added to the Material library:

  dark_blue_tex

===============================================================================

New pieces added in Library 534:

  f_car_bottom3
  stwa_hatch2
  w_block2_4
  wheel_mudguard
  window_shield16

Pieces changed in Library 534:

  window_shield2
  window_shield3
  window_shield7
  window_shield12

A "big" change has taken place, no longer will the filename of the Library
file itself hold the version number! This is done so that when a Library
changes, you won't have to go through all of your files to change each
and every one of them!

===============================================================================

New pieces added in Library 533:

  door_right_barred_frame
  hrwindow_lattice_1_2
  idslope1_6
  one_window
  samurai_armour

Pieces changed in Library 533:

  stairs

===============================================================================

New pieces added in Library version 532:

  boat_mast2
  tile8x16    (Thank you, Ludo!)
  glassoldwindow1_1
  hovercraft_base
  old_window1_1
  swivel_dh_fence1_3    (Thank you, Thomas!)

Pieces changed in Library 532:

  glass_oldwindow1_1
  glass_oldwindow1_2
  glass_oldwindow1_3
  glass_oldwindow1_4
  hlblock1_1
  octagon_canopy
  train_doorleft_glass
  train_doorright_glass

Pieces renamed in Library 532:

  train_cabine_new (was "train_cabin_new")
  train_cabine_new_glass (was "train_cabin_new_glass")

===============================================================================

New pieces added in Library version 531:

  octagon_canopy
  space_nose

===============================================================================

New pieces in Library version 530:

  curved_hrblock2_6
  hrblock4_4_open
  stwa_f_swivel    (Thank you, Torsten!)
  tech_axle_55_stop
  tech_axle_8_ended

===============================================================================

New pieces in Library version 529:

  bicycle_frame
  bicycle_wheel    (Thank you, Pieter!)
  hdblock1_1
  ski_l

In order to create a complete (white) bicycle use the following example:

  union {
    object { bicycle_wheel(t_white_tex) interior { ior 1.5 }
      translate <-34.2, 9, 0> }
    object { bicycle_frame(white_tex) translate <0, 9, 0> }
    object { bicycle_wheel(t_white_tex) interior { ior 1.5 }
      translate <0, 9, 0> }
  }

===============================================================================

New pieces in Library version 528:

  clikit_flower
  frblock1_5
  train_cabine_old2    (Thank you, Jeroen!)
  train_pantograph2    (Thank you, Jeroen!)
  train_rc_battery_bottom6_30    (Thank you, Jeroen!)
  train_rc_motor    (Thank you, Jeroen!)
  train_rc_motor_ornaments    (Thank you, Jeroen!)
  train_rc_wheels    (Thank you, Jeroen!)

Pieces changed in Library 528:

  train_bottom6_24
  train_bottom6_28

===============================================================================

New pieces in Library version 527:

  curved_wheelcover2_2
  fhrblock2_4
  h_closet2_4
  h_closet4_4    (Thank you, Pieter!)
  h_closet4_4mod
  idslope4_6mod

Pieces changed in Library 527:

  idslope4_6

===============================================================================

New pieces in Library version 526:

  dh_arch1_4    (Thank you, Pieter!)
  h_arch1_3
  tech_pipe_elbow

===============================================================================

New pieces in Library version 525:

  dhrblock1_3
  head_bp01    (which is the standard minifigure head with a standard face
                print already on it, no material_map required anymore)
  stwa_fvswivel3
  tech_piston3

Pieces changed in Library 525:

  tech_piston2

===============================================================================

New pieces in Library version 524:

  curved_inv_hrblock1_6
  lhpropellor2_4
  scala_flower_pot
  tech_liftarm_11_double_bent

Pieces changed in Library 524:

  forklift_1

===============================================================================

New pieces in Library version 523:

  tyre_balloon

Pieces changed in Library 523:

  bar1_6
  tech_liftarm_15    (Thank you, Antti!)
  window_shield

===============================================================================

New pieces in Library version 522:

  support2_2_closed_girder
  wheel_hard

Pieces changed in Library 522:

  f_block1_1
  frblock1_1
  frblock2_2
  guiding_h_block1_2
  guiding_h_block1_14
  h_block1_1
  hrblock1_1
  hrcone1_1
  i_slope1_3
  i_slope2_2
  i_slope2_3
  idslope4_2
  idslope4_4
  slope1_2
  slope1_3
  slope2_2
  slope2_3

===============================================================================

New pieces in Library version 521:

  dhrblock1_6
  octagon_cone
  tech_gear_20_tooth
  tech_gear_20_tooth_flat

Pieces changed in Library 521:

  i_slope2_3

===============================================================================

New pieces in Library version 520:

  mini_flag_sliced
  octagon_piece
  octagon_piece_side
  tech_axle_joiner2
  tech_liftarm_4_corner
  tech_liftarm_5
  tech_liftarm_6
  tech_liftarm_9_bent

Pieces changed in Library version 520:

  mini_flag

===============================================================================

New pieces in Library version 519:

  h_block4_10
  tech_connector
  tech_liftarm_9
  trih_block2_2

Pieces changed in Library version 519:

  space_cover  (was "space_cover_open")

===============================================================================

New pieces in Library version 518:

  f_claw1_2_new
  round_shield    (Thank you, Denise!)
  tech_link_chain    (Thank you, Denise!)
  tech_link_tread    (Thank you, Denise!)

===============================================================================

New pieces in Library version 517:

  hrwindow1_2    (Thank you, Mark!)
  tech_gear_12_tooth_flat    (Thank you, Mark!)
  tech_micromotor_pulley    (Thank you, Mark!)
  tech_piston2    (Thank you, Denise!)

Pieces changed in Library version 517:

  tech_gear_12_tooth

===============================================================================

New pieces in Library version 516:

  castle_door_large
  container_grab
  container_grab_grip
  curved_f_slope4_4
  curved_f_slope4_6
  light_element1_2
  steering_wheel_medium
  support2_2_girder
  train_buffers2

Pieces changed in Library version 516:

  train_wheels_old
  train_wheels_old_large

===============================================================================
  
New pieces in Library version 515:

  curved_f_slope2_3
  f_leftwinglet3_8
  f_rightwinglet3_8
  ramp_left2_4
  ramp_right2_4
  train_cabin_new
  train_cabin_new_glass

Pieces changed in Library version 515:

  hexagonal

Changes to the Material library:

A new variable has been added to the Material library, called maquette. Set this
to 1 and use a setting similar to the included maquette.pov file and you will
have something similar to the Global Illumination scenes that you may have seen
all over the Internet. Your models will then only have a beige texture which is
perfect for watching your model in a contrast rich environment. No distraction
from colors!

===============================================================================

New pieces in Library version 514:

  curved_slope1_3
  f_winglet2_4
  f_winglet4_4
  hexagonal
  h_block1_2_buttoned
  stwa_canopy3
  stwa_dh_swivel1_4
  stwa_fvswivel2
  stwa_f_cover4_4
  stwa_f_swivel4
  stwa_h_swivel4
  tech_flat_liftarm2
  vhside3_2_concave
  wheel_inside9

Pieces changed in Library version 514:

  tech_flat_liftarm3
  tech_flat_liftarm3_l_shape
  tech_flat_liftarm4
  tech_liftarm_7_bent

===============================================================================

New pieces in Library version 513:

  engine2_4
  tech_angle_connect_2
  tech_angle_connect_5
  tech_angle_connect_6
  tech_axle_joiner3
  tech_flat_liftarm3_l_shape
  tech_pulley_large
  window_bay3_8
  window_bay3_8_glass

===============================================================================

New pieces in Library version 512:

  jet_pack
  revolver
  tail_mini
  tech_axle_2_notched
  tech_flat_liftarm5
  tech_flat_liftarm6
  tech_gear_24_tooth_crown
  tech_liftarm_15
  tech_plug5
  tech_plug_locker
  tech_pole_reverser_handle
  tool_zip_line_handle

Pieces changed in Library version 512:

  lhpropellor2_2
  l_propellor2_2
  octagon_cornerpiece
  ship_steering_wheel
  stwa_pivotplug
  stwa_r2d2_leg
  techdhpblock1_2
  techdhpblock2_2
  techdhpblock2_4
  tech_hpblock1_2
  tech_hpblock2_2
  tech_pivotconnect2
  tech_pivotconnect3
  tech_plug1
  tech_plug2
  tech_plug3
  tech_plug4
  tech_plug_dual3
  train_coupling
  train_coupling_old

New textures have been added to the Material library:

  lt_green_tex

Renamed pieces in Library version 512:

  tech_flat_liftarm7 (was "tech_flat_liftarm_7")
  wheelaxle_old (was "wheelaxel_old")

===============================================================================

New pieces in Library version 511:

  connecting3swivel2_4
  connecting4swivel2_4
  corner_wall
  inv_ramp6_5
  tech_flat_triangle
  tech_f_block1_5
  vhi_arch1_4

===============================================================================

New pieces in Library version 510:

  dome_top_slots
  glass_oldwindow1_4
  hook_5
  hose_nozzle
  minifigure_vest
  oldwindow1_4
  tech_connector_ball_socket

Changes to material_510.lib:

  Added the basic_finish texture that used to be in all of the scene-files, it
  has been made version aware.

===============================================================================

New pieces in Library version 509:

  h_column1_1    (Thank you, Pieter!)

New textures have been added to the Material library in the POV-Ray 3.1 part as
well now:

  bnsf_green_tex

Pieces changed in Library version 509:

  train_wheels_old_large

Fixed the axle_ending when using age = 2

A lot of changes have been made to Library version 508 when it comes to the
actual rendering! I have made extensive changes to the Material library so that
you can now use newer versions of POV-Ray (3.5 and 3.6.x) and the recently
released MegaPOV 1.1!

And all of this while retaining the same overal image quality when using
Radiosity, perhaps even better! The only drawback is that rendering times will
be much longer when using the newer versions. But you get all of the new
features of those newer versions!

This does mean though, that there are some changes in the way you will be using
the material_508.lib and library_500.lib files in your .pov-files as well as in
the .ini's!

As far as the .ini-files are concerned, make sure you comment out the following
lines by adding a ; character front at the beginning of the corresponding lines:

  Create_Ini=
  Histogram_Name=
  Histogram_Grid_Size=0.0
  Histogram_Type=X ; NONE
  Version=

Inside your .pov-file there are a few changes too of course. I have taken care
so that material_508.lib automatically sees what version of POV-Ray you're
using so you don't have to worry about that, but you do have to switch on
Radiosity seperately for POV-Ray 3.5 and higher and MegaPOV by adding a:

  #declare radio = 1;

before you include the library files. See the sample files available on my
website on where you should place it. Other than that there is little for you to
change except to stay careful about using high ambient values in your other
textures, when they are, they will over expose an image badly! For the floor in
my sample sets I went from a value 0.4 to 0 to get things to look better again!

What has been changed also is that all technic axles now have a small rounding
on them, making them look even more realistic! This also affected the:

  brush_holder
  connecting_pole
  connect_bal
  f_dish
  hrbase4_4
  hrblock2_2
  jet_engine_cover
  jet_engine_turbine
  octagon_cornerpiece
  square_rig2_2
  square_rig2_2_small
  stwa_connector
  stwa_connector_2
  sub_propellor
  sub_screw_protector
  tech_axle_connector
  tech_axle_h_block1_2
  tech_axle_joiner1
  tech_flat_liftarm3
  tech_flat_liftarm4
  tech_gear_14_tooth_bevel
  tech_gear_24_tooth
  tech_gear_8_teeth
  tech_gear_8_tooth
  tech_liftarm_7_bent
  tech_locker_full
  tech_locker_thin
  tech_piston
  tech_plug_dual3
  tech_wheel_thin
  tri_rotor_piece
  wheel_inside4
  wheel_inside_large
  wheel_inside_large2

And all axles have been renamed from a faulty tech_axel into a correct
tech_axle!

===============================================================================

New pieces in Library version 508:

  bracket1_1    (Thank you, Erwin!)
  grilled_h_block2_4
  h_block8_16    (Thank you, Pieter!)
  slope1_1
  slope4_4
  tech_gear_12_tooth
  tech_liftarm_2
  tool_grappling_hook
  train_cylinder_curved
  train_wheels_old_large    (Thank you, Erwin!)
  tri_rotor_piece
  vh_block2_4    (Thank you, Pieter!)

Pieces changed in Library version 508:

  binoculars
  dish3_3
  dish4_4
  f_swiveltop4_2
  terrain_wheel
  train_wheels_old

New textures have been added to the Material library:

  bnsf_green_tex

Files newly added to the 508 archive are:

  reference_image.pov, a file to render your own Reference Gallery images!
  
  textures_poster.pov, a file in which all currently defined textures can be
                       seen.

===============================================================================

New pieces in Library version 507:

  bar1_3
  dish6_6
  f_block8_8
  f_leftwinglet3_12
  f_rightwinglet3_12
  f_sideleft3_2
  f_sideright3_2
  stwa_f_swivel1
  stwa_f_swivel2
  tech_gear_block1_4
  tech_round_protector

Pieces changed in Library version 507:

  dish6_6_open

Renamed pieces in Library version 507:

  pulley_holder2_2 (was "holder2_2")

New textures have been added to the Material library:

  dark_grey2_tex (the new 2004 version)
  lt_grey_tex (the new 2004 version)
  
===============================================================================

New pieces in Library version 506:

  h_sideleft4_2
  h_sideright4_2
  stwa_dh_swivel1_2    (Thank you, Torsten!)
  stwa_f_winglet8_8    (Thank you, Torsten!)
  stwa_pivotplug
  tech_plug4

Pieces changed in Library version 506:

  f_sideleft4_2
  f_sideright4_2
  wall_segment 3_6

===============================================================================

New pieces in Library version 505:

  dish3_3
  jet_engine3
  wall_segment3_6
  wall_segment_glass

New textures have been added to the Material library:

  blue_gold_tex
  dark_cyan_tex
  
===============================================================================

New pieces in Library version 504:

  corner_h_arch3_4
  corner_h_arch6_6
  dish8_8
  hrblock1_6
  sextant
  stwa_socket2_2
  stwa_turret2_2
  tech_gear_8_teeth
  tech_plug_dual3
  vh_quarter_panel4_4
  vizor_3

Pieces changed in Library version 504:

  chain_saw
  cup_2
  horn
  laser_mount
  pan_1
  pan_2

Renamed pieces in Library version 504:

  dish6_6_open (was "dish6_6")
  curved_hrblock1_6 (was "hrblock1_6")

===============================================================================

New pieces in Library version 503:

  f_block4_6mod    (Thank you, Pieter!)
  f_sideleft4_2
  f_sideright4_2
  frblock4_4
  spear
  tech_engine_cylinder_head
  train_cargo_door2
  train_weight2_6
  wildwest_round_fence4_4

Pieces changed in Library version 503:

  train_wheels_old

===============================================================================

New pieces in Library version 502:

  f_block6_12mod    (Thank you, Pieter!)
  h_block8_8    (Thank you, Pieter!)
  motorbike_body
  motorbike_windshield
  popsicle    (Thank you, Pieter!)
  stwa_connector
  stwa_connector_2
  stwa_h_swivel3
  tech_pneumatic_t_piece

Pieces changed in Library version 502:

  train_9v_motor_ornaments

===============================================================================

New pieces in Library version 501:

  binoculars
  dhrblock1_4
  h_block1_2_cutout
  h_block4_12
  tech_axel_3_button
  tech_dhblock1_2
  train_12v_motor
  train_12v_wheelconnector

Pieces changed in Library version 501:

  h_one_window
  h_swivel2block1_2    (Thanks for showing me the error, Pieter)
  stwa_canopy2
  window_shield3

The LEGO(TM) text on the button contained a small error, this has now been
fixed thanks to Marcin Woloszyn! I've also changed 6 textures to look more
realistical than they did in version 500. They are:

  red_tex
  t_blue_tex
  t_cyan_tex
  t_green_tex
  t_red_tex
  t_yellow_tex

And I would also like to mention that for the transparent textures I've used
an ior of 1.05 in the past, starting with version 501 I will be using an ior
of 1.5 for better looking transparent pieces!

===============================================================================

Considerations for Library version 500:

Pieces to take into consideration when (re)doing models:

  hlblock1_1
  hlblock1_4
  h_connect1_2
  saw_engine
  swiveltop1_2 and 2_2 and swivelbase1_2
  tech_hpblock1_2 and 2_2
  tech_h_block1_1 thru 16

This because they have been changed and all pieces connecting to them should
or may have to be repositioned. Everything connecting to them should now be
y + 5.6.

Something similar applies to the:

  f_block2_2_up
  holder2_2
  palm_base
  palm_segment
  v_magneet_holder
  w_block2_2

All slope1_2 and slope2_2's should receive modifications to their applied
image_maps, all regular image_maps should be looked into as well! slope2_3's
as well...

  joy_stick and joy_base are y + 3.65 away from eachother now...

And the little men in their sitting positions should be y + 3.6 instead of the
"3.something" I have used in the past! :-(

The following pieces have been renamed:

  corner_vhslope2_2 (was "corner_dvhslope2_2")
  curved_f_slope2_2 (was "alpha_f_slope2_2")
  curved_slope2_2 (was "alpha_slope2_2")
  dh_slope2_2 (was "vhslope2_2")
  diver_vizor (was "vizor_3")
  door_left_frame (was "door_frame")
  door_left_glass (was "door_glass")
  f_winglet6_6 (was "stwa_f_winglet6_6")
  guiding_f_block1_8 (was "f_slider1_8")
  hlblock4_1 (was "stwa_wh_block1_4")
  life_vest (was "mae_west")
  sub_screw_protector (was "screw_protector")
  tech_axel_joiner1 (was "tech_piece1")
  tech_flat_liftarm_7 (was "tech_f_piece3")
  tech_gear_14_tooth_bevel (was "tech_gearwheel_thin")
  tech_gear_16_tooth (was "tech_gear_2")
  tech_gear_24_tooth (was "tech_gear_1")
  tech_gear_8_tooth (was "tech_gear_small")
  tech_gear_differential (was "tech_special_gear")
  tech_liftarm_7 (was "tech_piece3")
  tech_liftarm_7_bent (was "tech_piece2")
  train_lowernose (was "lower_trainnose")
  train_uppernose (was "upper_trainnose")
  train_uppernose_glass (was "upper_trainnose_glass")
  vhslope2_2 (was "dvhslope1_2")

New pieces:

  curved_f_slope2_2
  curved_slope2_2
  diver_harpoon
  diver_speargun
  dualslope3_2
  dual_tilted_frame
  fence1_6_barred
  fence1_8
  forklift_1
  f_block2_3_up
  hrblock1_6
  h_block4_6
  h_single_wheelbase2_2
  monorail_bogey
  open_engine_l
  spider
  stairs
  tech_angle_connect_4
  tech_axel_cover_2
  tech_flat_liftarm_3
  tech_flat_liftarm_4
  tech_liftarm_3
  train_12v_powerrail_straight
  train_12v_rails_sleeper
  train_12v_rail_straight
  train_bottom6_16
  train_locomotive_bottom
  water_tab2
  wooden_crate

